Blackstar HT-5210 2x10 Valve Combo
- Musical Instruments Gear
- follow your demand
- Negotiation
- 499.00
- paypal,UnionPay, Visa/MasterCard, Amex, Discover,T/T
- Miss Lin2020-07-10 09:46:19
Welcome to my shop! Glad to serve you! Please send your question!
Product Details
Condition: | New | Brand: | Blackstar | Type: | Electric |
MPN: | HT5210 | UPC: | 845644002252 | ISBN: | Does Not Apply |
EAN: | Does Not Apply |
Product Description
Blackstar HT-5210 2x10 Valve Combo
The HT-5 is the ultimate studio and practice amp, packing great valve tone and innovative features into a two channel, footswitchable format. The patented ISF circuit gives you infinite adjustment over the characteristics of the tone control network and takes you from the USA to the UK and anywhere in between. So now you can effectively design your own tone and finally find ‘the sound in your head’.
In making the HT-5 ideally suited to home and studio use, the aim was to develop a valve amp which sounded full and toneful even at the lowest volume level. With this in mind the Blackstar design team developed a brand new valve power amplifier topology. The HT-5 power amplifier is a low powered push-pull design which produces the crunch and break-up characteristics of a traditional 100W output stage, but at a much lower volume. This is achieved by the use of a 12BH7 dual triode in push-pull configuration producing 5 Watts output, which is rich in valve harmonics and compression.
The HT-5 also has a fully specified stereo speaker emulated output which further enhances the studio credentials and allows any guitarist to get amazing valve tone straight to tape or disk, or through headphones. It also features the unique 4x12/1x12 voicing switch allowing you to change the tonal characteristics of the emulated signal between two emulated cabinet types. The stereo speaker emulated output can be used at the same time as the internal speaker/extension cab, providing headphone free monitoring or the choice to blend a mic’d speaker and emulated signal together for unrivalled usability when recording at home or in the studio. In addition the speaker output can be turned off for ‘silent’ practice or recording.
Add to this an effects loop with switchable level, 16Ω and 8Ω speaker outputs which allow you to run the amp into an external speaker cabinet of your choice, and a stereo MP3/Line in allowing you to jam along to your favourite tracks, you have everything you need for recording or practising.
Evolving from the award winning HT-5R and the limited edition HT-5TH, the HT-5210 adds a 2x10" combo to the award-winning HT family. Equipped with Blackstar’s patented ISF control and studio quality digital reverb, the HT-5210 delivers outstanding valve tones at levels you can use in the bedroom, rehearsal room and even on stage.
Features- Innovative 5 Watt valve combo 1xECC83 and 1x12BH7 valves Unique push pull power amp design Award winning HT Pedal preamp Two footswitchable channels 2x 10" Celestion speakers Enhanced tone controls Patented Infinite Shape Feature (ISF) Fully equipped for studio or practice Digital Stereo Reverb Speaker emulated output with 1x12 or 4x12 voicing Effects loop with effects level switch Footswitch included Classic Blackstar styling 5 Watt, Push-Pull Design
The HT-5 power amplifier is a low powered push-pull design which produces the crunch and break-up characteristics of a traditional 100W output stage, but at a much lower volume. This is achieved by the use of a 12BH7 dual triode valve in push-pull configuration producing 5 Watts output, which is rich in valve harmonics and compression, sounding full and toneful even at the lowest volume level.
Two Footswitchable ChannelsThe guitar amplifier has two channels available for selection, a Clean channel and an Overdrive channel. Using the Volume control while on the Clean channel you are able to deliver everything from a clean sound through to a crunch tone. Alternatively you can select the Overdrive channel and again using the Gain control, change from a clean sound on the edge of breakup right through to a distorted lead tone.
Digital ReverbThe reverb control sets the overall level of the reverb effect. With the control fully counter clockwise there will be no reverb. Turning the control clockwise will increase the amount of reverb.
Speaker Emulated OutputThe Blackstar emulated output design is a new benchmark for pro direct recording. This no-compromise design makes it easy to get your tone to disk and tape. You can also use it to run a line out to a PA.
ISF ControlThe ISF control works in conjunction with the Tone control. It allows you to choose the exact tone signature you prefer. Fully CCW is a more American characteristic with a tight bottom end and more aggressive middle, and fully CW is a British characteristic which is more ‘woody’ and less aggressive.
Contact Us
- Custom Guitar Builder
- Email[email protected]
- AddressShan Dong Province Weifang City
- Phone(Working Time)86-13305315989
- WhatsApp+86 15512111291
Related News
Discovering the Unique Features of Martin Short Scale Acoustic Guitars |
A Piece of History: The 1946 Martin Guitar |
Elevate Your Music with a Classic: Martin 28V HD Acoustic Guitar |
Product Categories
- Charvel
- Supro
- Bugera
- JHS
- Ernie Ball Music Man
- Celestion
- SKB
- Gibson Accessories
- On-Stage Stands
- Eventide
- Two Notes
- Planet Waves
- D'Addario
- Bogner
- Kala
- MONO
- LR Baggs
- Xotic
- Ernie Ball
- Rivera
- Fulltone
- Zoom
- Levy's
- RJM Music
- Positive Grid
- Traveler Guitar
- Hercules Stands
- Eminence
- Radial
- BluGuitar
- Behringer
- ISP Technologies
- MusicNomad
New Products
Top Products
Martin HD35 |